[Skip to Content]
Access to paid content on this site is currently suspended due to excessive activity being detected from your IP address 54.205.176.107. Please contact the publisher to request reinstatement.
[Skip to Content Landing]
Article
October 4, 1913

A METHOD FOR ASEPTIC URETERAL CATHETERIZATION

Author Affiliations

San Francisco Instructor in Urology, University of California

JAMA. 1913;61(14):1296-1297. doi:10.1001/jama.1913.04350150052019

This article is only available in the PDF format. Download the PDF to view the article, as well as its associated figures and tables.

Abstract

The sterilizing and aseptic handling of ureteral catheters has always been more or less of a problem to the cystoscopist. The method that I here present is one that I have used lately and have found simple and efficient.

The boiling or immersion of the catheters in various solutions renders them soft and difficult to handle. Formaldehyd as it is generally used is not reliable. With a sterile catheter that is not protected it is almost impossible to avoid contamination of the long free portion. It is also very difficult for the cystoscopist to keep his hands clean, as the connection and switch cannot be sterilized and the handling of the catheter with forceps or gauze is difficult.

I have bags made of muslin 2 cm. wide and about 75 cm. long. It is important to have them wide enough so that the bags fold up readily as the catheter

First Page Preview View Large
First page PDF preview
First page PDF preview
×