[Skip to Content]
Access to paid content on this site is currently suspended due to excessive activity being detected from your IP address 54.166.74.94. Please contact the publisher to request reinstatement.
[Skip to Content Landing]
Article
September 14, 1957

TWO NEW MODIFICATIONS OF THE ENDOTRACHEAL TUBE

Author Affiliations

Lincoln, Neb.

Chairman, Department of Anesthesiology, Lincoln General Hospital, and Clinical Associate in Surgery, University of Nebraska College of Medicine.

JAMA. 1957;165(2):149-150. doi:10.1001/jama.1957.72980200001009

This article is only available in the PDF format. Download the PDF to view the article, as well as its associated figures and tables.

Abstract

The practice of endotracheal anesthetization not infrequently imposes two problems: easy insertion of the tube, for which exact control of the distal end of the tube is needed and is rarely provided, and the leaking inflatable cuff. In an attempt to solve both problems, I offer two devices, the threaded endotracheal tube and the double-cuff endotracheal tube.

Threaded Endotracheal Tube  With the use of a simple paper-punch, a small hole is made near the end of the tracheal tube, and a strong thread is passed through the hole. The anesthesiologist then holds the tube in the usual manner and manipulates the thread with two fingers. In this way, the sharp upward curve at the end of the tube and the precise control of the tube, both so necessary to tracheal intubation, are obtained. Care must be taken that the thread does not injure tissues anterior to it. The thread can

First Page Preview View Large
First page PDF preview
First page PDF preview
×