[Skip to Content]
Access to paid content on this site is currently suspended due to excessive activity being detected from your IP address 54.166.3.44. Please contact the publisher to request reinstatement.
[Skip to Content Landing]
Article
May 1955

FIXATION FORCEPS

Author Affiliations

San Antonio, Texas

AMA Arch Ophthalmol. 1955;53(5):720. doi:10.1001/archopht.1955.00930010728018

This article is only available in the PDF format. Download the PDF to view the article, as well as its associated figures and tables.

Abstract

THIS instrument is a rustless-steel thumb forceps curved about 90 degrees, as shown in the accompanying three-quarterscale illustration. The forceps is available with either spring or sliding catch, which makes it self-retaining. The serrated, interdigitating jaw margins face on the convex curve at its distal end. The jaws are 4 mm. in length.

This forceps was made to my specifications about seven years ago and has been found useful for rotating the globe in strabismus and cataract surgery. It may be applied easily because the jaw margins are located on the outer side of the curve. Bulbar conjunctiva alone, or a rectus muscle in addition, may be grasped. An advantage gained is that there is less twisting of and trauma to tissue held by the jaws while the eye is in the rotated position.

This forceps may be obtained from the Storz Instrument Company.

First Page Preview View Large
First page PDF preview
First page PDF preview
×