[Skip to Content]
[Skip to Content Landing]
Article
May 1970

Fixation of Orbital Floor ImplantsDescription of a Simple Technique

Author Affiliations

New York; Chicago
From the Manhattan Eye, Ear, and Throat Hospital, New York. Dr. Putterman was a fellow in Ophthalmic Plastic and Reconstructive Surgery at Manhattan Eye, Ear, and Throat Hospital. He is now at Michael Reese Hospital and Medical Center and University of Illinois Eye and Ear Infirmary, Chicago.

Arch Ophthalmol. 1970;83(5):598. doi:10.1001/archopht.1970.00990030598014
Abstract

AN ACCEPTABLE method of repairing a blowout fracture of the orbital floor is to place a pliable implant (Teflon, Silastic, Supramid, etc) over the fracture site.1 Unless the implant is fixed in position, it is possible for it to migrate over the orbital rim requiring a reoperation for its removal or for repair of the recurrence of the herniation of the orbital contents through the fracture site.2

One method of preventing migration of the implant is to drill a hole in the orbital rim and to suture permanently the implant to the rim.3 A simpler method of fixation, which eliminates the trouble and hazards of drilling a hole as well as the possible reaction to the permanent suture material placed in the rim, is to place a "tongue" of the implant into the anterior aspect of the fracture.

Description of Technique  After fashioning the implant to cover

First Page Preview View Large
First page PDF preview
First page PDF preview
×