[Skip to Content]
[Skip to Content Landing]
Article
April 24, 1948

AUREZ HEARING AID, MODEL AUREX, ACCEPTABLE

JAMA. 1948;136(17):1099. doi:10.1001/jama.1948.72890340002009a

This article is only available in the PDF format. Download the PDF to view the article, as well as its associated figures and tables.

Abstract

Manufacturer: Aurex Corporation, 1117 North Franklin Street, Chicago 10.

This is a plastic cased hearing aid, with separate batteries. The crystal receiver supplied has the Aurex trademark and is connected to the amplifier by a plastic covered cord (plugs at both ends). A four conductor battery cord connects to the batteries used.

One sliding type control on the side of the case serves as the switch and volume control. A rotating fan-type shutter may be turned from the center front of the case to close the microphone openings and serves as a partial tone control.

Dimensions and Weight  Dimensions: 70 by 63 by 22 mm. (2¾ by 2½ by ⅞ inch),Weight: Unit alone, approximately. 92 Gm. (3¼ ounces). With batteries, approximately 269 Gm. (9½ ounces).

Acoustical Gain  Measurements were made of the acoustical gain of the instrument in decibels. This is the decibel difference in sound pressure between the

First Page Preview View Large
First page PDF preview
First page PDF preview
×